Chapter 2: Getting Started
2-2
Powering on your Eee PC
These are only quick instructions for using your Eee PC.
1.
Install the battery pack
2.
Connect the AC power
adapter
• When you open the display panel, do not force it down to
the table or else the hinges may break! Never lift the Eee PC
by the display panel!
• Only use battery packs and power adapters supplied with
this Eee PC or specifically approved by the manufacturer or
retailer for use with this model or else damage may occur to
the Eee PC. The output voltage of this adapter is +12Vdc, 3A.
• Never attempt to remove the battery pack while the Eee PC
is turned ON, as this may result in the loss of working data.
Remember to fully charge the battery before first use and whenever
it is depleted to prolong battery life.
3.
Turn ON the Eee PC
Damage may occur if you use
a different adapter to power
the Eee PC. You may damage
both your battery pack(s) and
the Eee PC with a faulty AC-
DC adapter.
3
1
2
Summary of Contents for Eee PC 1004DN
