28
GigaX2008EX L2 Managed Switch User Manual
go through. If ʻAutoʼ is selected, the behavior of the selected port is controlled by
802.1x protocol. All ports should be set to ʻAutoʼ under normal conditions.
Guest VLAN:
Specify a guest VLAN to clients that are not 802.1x-capable.
Click
OK
to make the settings effective permanently. Click
Reload
to refresh the
settings to current value.
Figure 29. Port Access Control
4.7.2 Dial-In User
Dial-in User is used to define users in the local database of the switch.
User Name:
New user name.
Password:
Password for the new user.
Confirm Password:
Enter the password again.
Dynamic VLAN:
Specify the VLAN ID assigned to the 802.1x- authenticated clients.
Please click
Add
to add the new user. Click
Modify
when you have finished
the modifications. Click
Remove
when you want to remove the selected user.
Click
OK
to make the settings effective permanently. Click
Reload
to refresh the
settings to current value.
Figure 30. Dial-In user
