45
GigaX2008EX L2 Managed Switch User Manual
SNMP version?
(1/2c): [old snmp version] <new snmp version>
Destination IP
(old IP address): <new IP address>
Community
(old community string): <new community string>
Allows user to delete a trap entry from trap table.
CLI command:
snmp trap delete
Trap table entry
(table index): <entry id to delete>
[Reload]
Restores the previous saved settings from configuration file.
CLI command:
snmp trap retrieve
5.3.5 Security Commands
[Reauthentication]
Allows user to open or close periodic reauthentication.
CLI command:
security dot1x bridge reauth <enable / disable>
[Reauthentication Time]
Allows user to set up the reauthentication time.
CLI command:
security dot1x bridge reauthtime <reauthentication time
(1-4294967295 sec)>
[Authentication Method]
Allows user to set up the authentication method (RADIUS or Local database).
CLI command:
security dot1x bridge authmeth <type (1:local 2:radius)>
[Quiet Period]
Allows user to set up the quiet period.
CLI command:
security dot1x bridge quietperiod <quiet period (1-65535
sec)>
[Retransmission Time]
Allows user to set up the retransmission time.
CLI command:
security dot1x bridge retxtime <retransmission time (1-65535
sec)>
[Max Reauthentication Attempts]
Allows user to set up the max number of the reauthentication attemps.
