GigaX Series L2 Managed Switch User’s Guide
90
5.3.5
Security
Commands
[Reauthentication]
Allows user to open or close periodic reauthentication.
CLI command :
security dot1x bridge reauth
<enable / disable>
[Reauthentication Time]
Allows user to set up the reauthentication time.
CLI command :
security dot1x bridge reauthtime
<reauthentication time
(1-4294967295 sec)>
[Authentication Method]
Allows user to set up the authentication method (RADIUS or Local database).
CLI command :
security dot1x bridge authmeth
<type (1:local 2:radius)>
[Quiet Period]
Allows user to set up the quiet period.
CLI command :
security dot1x bridge quietperiod
<quiet period (1-65535
sec)>
[Retransmission Time]
Allows user to set up the retransmission time.
CLI command :
security dot1x bridge retxtime
<retransmission time
(1-65535 sec)>
[Max Reauthentication Attempts]
Allows user to set up the max number of the reauthentication attemps.
CLI command :
security dot1x bridge reauthmax
<max reauthentication
attemps (1-10)>
Summary of Contents for GigaX 2124X
