background image

2

ASUS GigaX1024P/GigaX1024

English

Introduction

GigaX1024P rack mountable switch provides non-blocking, wire-speed
performance and easy management to meet your intensive network
demands. It features auto-sensing, and auto MDI/MDIX Ethernet ports for
simple connectivity and enhance your network performance with flow
control and QoS ability.

Features

24 10/100 Mbps RJ-45 ports

2 10/100/1000 Mbps RJ-45 ports (GigaX1024P only)

8.8 Gbps switch capacity

6.6 Mbps forwarding rate for GigaX1024P and 3.6 Mbps forwarding rate
for GigaX1024

Plug and play with your networks – auto MDI/MDIX, and auto-sensing for
speed and duplex mode on all ports

Fan-less design provides quiet operation

Place on a flat surface, or mounts on a rack

Flow control (802.3x in full-duplex mode) schemes to support zero loss
under temporary network congestion

Head of Line (HOL) blocking preventions

Recognize 802.1p/TOS/DS to meet QoS requirements

8K MAC address learning and aging for concurrent connections to 8K
nodes

Up to 200Mbps for fast Ethernet ports and 2000Gbps for Gigabit ports in
full-duplex mode

Easy to read LEDs providing quick overview of link status, speed, duplex
mode and collision on all ports

Lightly management through ASUS CNM software (GigaX1024P only)

Tx/Rx bandwidth management for each port (GigaX1024P only)

32 port-based VLAN groups (GigaX1024P only)

Up to 8 manual trunk groups, support 802.3ad (GigaX1024P only)

Port management and status monitoring (GigaX1024P only)

Broadcast storm filtering (GigaX1024P only)

IGMP v1, v2 snooping (GigaX1024P only)

Summary of Contents for GigaX1024











Reviews: