iPBX30 User Manual
Chapter 5
43
Setting
Description
C o n n e c t i v i t y
Check (Cont.)
will need to disable this feature. Otherwise, iPBX30 will
make incorrect judgment regarding the WAN link status
and thus affect the behavior of the load balancing or line
back up.
C o n n e c t i v i t y
Check Interval
The interval that iPBX30 will check for the WAN link
status. The allowable value is 1 to 60 seconds.
C o n n e c t i v i t y
Check IP Address
(WAN1)
Enter the IP address of the specific network device that
the traffic will pass through. This field is optional. Normally,
you don’t need to provide any IP address here, unless you
know the traffic must pass a specific network device.
C o n n e c t i v i t y
Check IP Address
(WAN2)
Enter the IP address of the specific network device that
the traffic will pass through. This field is optional. Normally,
you don’t need to provide any IP address here, unless you
know the traffic must pass a specific network device.
5.3.2 Setting Up WAN Load Balancing and Line
Back Up
Figure 5.8. Load Balancing Configuration
Summary of Contents for iPBX30
Page 1: ...iPBX30 User Manual E2883 December 2006 ...
Page 151: ......
