Chapter 7
iPBX30 User Manual
56
Field
Description
Subnet Mask Indicates which parts of the destination address refer to the
network and which parts refer to a computer on the network.
Refer to Appendix 11 for an explanation of network masks.
The default route uses a 0.0.0.0 for subnet mask.
Gateway
Gateway IP address
Interface
Available option include AUTO, Eth0 (LAN), Eth1 (WAN),
PPPoE:0 (unnumbered), PPPoE:1 (1st PPPoE session),
PPPoE:2 (2nd PPPoE session). These options are
selectable from the drop-down list. If AUTO is selected, the
router will automatically assign an interface to route the
packets based on the gateway IP address.
7.3.2 Adding Static Routes
Figure 7.3. Static Route Configuration
Follow these instructions to add a static route to the routing table.
1. Click the
Advanced ->Static Route
menu to open the
Static
Route
configuration page.
2. Enter static routes information such as destination IP address,
destination subnet mask, gateway IP address and the interface
in the corresponding fields.
To create a route that defines the default gateway for your
LAN, enter 0.0.0.0 in both the Destination IP Address and
Subnet Mask fields.
3. Click
Add
to add a new route.
Summary of Contents for iPBX30
Page 1: ...iPBX30 User Manual E2883 December 2006 ...
Page 151: ......
