Chapter 9
iPBX30 User Manual
76
9.5.2 Modify an ACL Rule
To modify an ACL rule, follow the instructions below:
1.Click
Firewall/NAT ->ACL
menu to open the ACL Rule
Configuration page.
2. Click on the
icon of the rule to be modified in the inbound
ACL table or select the rule number from the
ID
drop-down list.
3. Make desired changes to any or all of the following fields: action,
source/destination IP, service, time and log.
4. Click on the
Modify
button to modify this ACL rule. The new
settings for this ACL rule will then be displayed in the access
control list table at the bottom half of the ACL Configuration
page.
9.5.3 Delete an ACL Rule
To delete an ACL rule, click on the icon in front of the rule to be
deleted.
9.5.4 Display ACL Rules
To see existing ACL rules, just open the ACL Rule Configuration
page by clicking
Firewall/NAT ->ACL
menu and then select a traffic
direction from the T
raffic Direction
drop-down list.
9.6
Configuring Self-Access ACL Rules
–(Firewall/NAT ->Self-Access ACL)
Self-Access rules control access to/from the iPBX30 itself. You may
use Self-Access Rule Configuration page to:
• Add a Self-Access rule
• Modify an existing Self-Access rule
• Delete an existing Self-Access rule
• View existing Self-Access rules
Summary of Contents for iPBX30
Page 1: ...iPBX30 User Manual E2883 December 2006 ...
Page 151: ......
