43
Settings
Hold Key Lock
The Hold Key on the right side of
the handset prevents accidental
touching of the keypad. Push the
key lock button downward to lock
the keypad. A key lock icon
appears on top of the idle screen
to indicate the lock status. To
unlock the keypad, push the key lock button
upward.
Fixed Dial
This function limits dialing to the numbers that
you specify. Fixed dialing is a service offered by
some service providers.
The Fixed Dial option can be set to On or Off
and a fixed dial list can be defined.
NOTE: This option requires a password, known as PIN2.
Consult your service provider if you do not know the password.
Barred Dial
This function enables you to block dialing of
certain numbers. Barred dialing is a service
offered by some service providers.
To enable the option, highlight the Barred Dial
option from the Security Setup menu and press
the left soft key
to toggle the option to On
or Off.
NOte
: This option requires a password. Consult your service
provider if you do not know your password. Not all service
providers support this function.
Change Password
Go to
Settings > Security Settings > Change
Password
to change passwords for SIM card
PINs or for the phone.
To change a password:
1. Highlight the Change Password option
and press OK.
2. Select the password you want to change:
PIN, PIN2, or Phone Lock Code.
3. You are prompted to enter the old
password, then enter the new password.
NOTE: The default phone lock password is 1234. Consult your
service provider if you have forgotten a PIN password or need
further assistance with PIN passwords.
Factory Settings
Go to
Settings > Security Settings > Factory
Settings
to restore all settings to factory
default, just as they were when you purchased
the phone.
To restore factory default settings:
Highlight the Restore Factory Default option
from the Security Setup menu and press the
enter key. All factory default settings are then
restored.
NOte
: This option requires a password. Use the default
password, 1234, to access this setting.