ASUS JIG Board User Manual
ASUSTeK Confidential
4 October 14, 2011
3
Update BIOS binary file to Target via
SPI extend card if the manufacturer of
EC is ENE
3.1 ShareROM Architecture (
One file
)
Please Reference Appendix A
Step 1: Remove all power sources
(include battery and power supply)
from target board.
Step 2: Plug in SPI extend card to JIG3 extend port(CON301).
Note: Extend card not support hotplug.
Step 3: Connect USB cable from CN1 to your PC’s USB connector.
Step 4: Connect FPC cable from SPI extend card to your target board’s keyboard connector, make
sure SPI extend card connect Pin1 is connected to target board keyboard connector’s Pin1.
Step 5: Use a USB cable connect GND between JIG3 CN2 and target board USB port
GND
USB
JIG Board Extend connecter
EPC
NB
JIG Board
SPI Ext. Card
Step2
