background image

ASUS M2N2 WS Professional 

-

4.7.2 

ASUS O.C. Profile

This item allows you to store or load multiple BIOS settings. 

Select Menu

Item Specific Help

Press 

[Enter] to 

select.

ASUS O.C. Profile

 

Load BIOS Profile

  Save BIOS Profile

Phoenix-Award BIOS CMOS Setup Utility

                       

Tools

Select Menu

Item Specific Help

Load BIOS Profile from 

Profile 1.

Load BIOS Profile

Load from Profile 1

Load from Profile 2

Load from File

Phoenix-Award BIOS CMOS Setup Utility

                       

Tools

Load BIOS Profile

Load from Profile 1/2

Allows you to load the previous BIOS settings saved in the BIOS Flash. Press 

<Enter> to load the file.

Load from File

Allows you to load the previous BIOS files saved in the hard disk/floppy disk/USB 

flash disk with the FAT32/16/12 format. Follow the instructions below to load the 

BIOS file.
 

1.  Insert the storage devices that contain the “xxx.CMO” file.

 

2.  Turn on the system.

 

3.  Enter BIOS setup program. Go to the “Tools” menu to select  

 

 

“Load from File”. Press <Enter> then the setup screen will appear.

 

4.  Press <Tab> to switch between drives before the correct    

 

“xxx.CMO” file is found. Then press <Enter> to load the file.   

 

5.  A pop-up message will inform you when the loading process  

 

 

finishes.

•  Suggest only to update the BIOS file coming from the same    

 

memory/CPU configuration and BIOS version.

 

•  Only the “xxx.CMO” file can be loaded.

Summary of Contents for M2N32 WS Professional



































































































































Reviews: