2-30
Chapter 2: BIOS setup
2.4.4
Onboard Devices Configuration
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4][2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC]
Parallel Port Mode [Normal]
Allows you to select the Parallel Port mode. Configuration options: [Normal] [EPP]
[ECP] [EPP+ECP]
Onboard Devices Configuration
Serial Port1 Address
[3F8/IRQ4]
Parallel Port Address
[378]
Parallel Port Mode
[Normal]
Allows BIOS to select
Serial Port1 Base
Addresses.
OnBoard LAN Boot ROM [Disabled]
Allows you to enable or disable the OnBoard LAN Boot ROM.
Configuration options: [Enabled] [Disabled]
SouthBridge ACPI HPET TABLE [Enabled]
Allows you to enable or disable SouthBridge ACPI HPET TABLE.
Configuration options: [Disabled] [Enabled]
2.4.5
PCI PnP
The
PCI PnP
menu items allow you to change the advanced settings for PCI/PnP
devices. The menu includes setting IRQ and DMA channel resources for either
PCI/PnP or legacy ISA devices, and setting the memory size block for legacy ISA
devices.
Take caution when changing the settings of the PCI PnP menu items. Incorrect
field values can cause the system to malfunction.
Summary of Contents for M3N78-AM
Page 1: ...Motherboard M3N78 AM ...
Page 12: ...xii ...
Page 46: ...1 34 Chapter 1 Product introduction ...
Page 102: ...3 14 Chapter 3 Software support ...