ASUS M3N78-AM
2-31
Plug and Play O/S [No]
When set to
[No]
, BIOS configures all the devices in the system. When set to
[Yes]
and if you install a Plug and Play operating system, the operating system
configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]
PCI Latency Timer [64]
Allows you to select the value in units of PCI clocks for the PCI device latency
timer register. Configuration options: [32] [64] [96] [128] [160] [192] [224] [248]
Allocate IRQ to PCI VGA [Yes]
When set to
[Yes]
, BIOS assigns an IRQ to PCI VGA card if the card requests for
an IRQ. When set to
[No]
, BIOS does not assign an IRQ to the PCI VGA card even
if requested. Configuration options: [Yes] [No]
Palette Snooping [Disabled]
When set to
[Enabled]
, the palette snooping feature informs the PCI devices that
an ISA graphics device is installed in the system so that the latter can function
correctly. Configuration options: [Disabled] [Enabled]
IRQ-xx assigned to [PCI Device]
When set to
[PCI Device]
, the specific IRQ is free for use of PCI/PnP devices.
When set to
[Reserved]
, the IRQ is reserved for legacy ISA devices.
Configuration options: [PCI Device] [Reserved]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Plug And Play O/S
[No]
PCI Latency Timer
[64]
Allocate IRQ to PCI VGA
[Yes]
Palette Snooping
[Disabled]
IRQ-3 assigned to
[PCI Device]
IRQ-4 assigned to
[PCI Device]
IRQ-5 assigned to
[PCI Device]
IRQ-7 assigned to
[PCI Device]
IRQ-9 assigned to
[PCI Device]
IRQ-10 assigned to
[PCI Device]
IRQ-11 assigned to
[PCI Device]
IRQ-14 assigned to
[PCI Device]
IRQ-15 assigned to
[PCI Device]
No: lets the BIOS
configure all the
devices in the
system.
Yes: lets the
operating system
configure Plug and
Play (PnP) devices
not required for
boot if your system
has a Plug and Play
operating system.
Summary of Contents for M3N78-AM
Page 1: ...Motherboard M3N78 AM ...
Page 12: ...xii ...
Page 46: ...1 34 Chapter 1 Product introduction ...
Page 102: ...3 14 Chapter 3 Software support ...