1.7.2
Memory configurations
You may install 512MB, 1GB, 2GB, and 4GB unbuffered ECC and non-ECC DDR3 DIMMs
into the DIMM sockets.
• You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
• We recommend that you install the memory modules from the blue slots for better
overclocking capability.
• Always install DIMMs with the same CAS latency. For optimum compatibility, we
recommend that you obtain memory modules from the same vendor.
• Due to CPU specification, AMD
®
100 and 200 series CPUs support up to DDR3
1066MHz. With ASUS design, this motherboard can support up to DDR3 1333MHz.
• When overclocking, some AMD CPU models may not support DDR3 1600 MHz or
higher frequency DIMMs.
• Due to the memory address limitation on 32-bit Windows
®
OS, when you install 4GB
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
-
Install a maximum of 3GB system memory if you are using a 32-bit Windows
®
OS.
-
Use a 64-bit Windows
®
OS if you want to install 4GB or more memory on the
motherboard.
• This motherboard does not support DIMMs made up of 256 megabits (Mb) chips or less.
M5A88-M EVO Motherboard Qualified Vendors Lists (QVL)
DDR3-2000(O.C.)MHz capability for AMD AM3 socket
• The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked or at a
higher frequency, refer to section
2.4 Ai Tweaker menu
for manual memory frequency
adjustment.
• For system stability, use a more efficient memory cooling system to support a full
memory load (2 DIMMs) or overclocking condition.
Vendors
Part No.
Size
SS/
DS
Chip
Brand
Chip
NO. Timing Voltage
DIMM socket support (Optional)
1 DIMM 2 DIMM 4 DIMM
Apacer
78.AAGD5.9KD(XMP)
6GB (3 x 2GB)
DS
-
-
9-9-9-27 1.65V
•
G.SKILL
F3-16000CL9D-4GBFLS(XMP)
4GB (2 x 2GB)
DS
-
-
9-9-9-24 1.65V
•
G.SKILL
F3-16000CL9D-4GBTD(XMP)
4GB (2 x 2GB)
DS
-
-
9-9-9-27 1.65V
•
G.SKILL
F3-16000CL6T-6GBPIS(XMP)
6GB (3x 2GB )
DS
-
-
6-9-6-24 1.65V
•
KINGSTON KHX2000C9AD3T1K2/4GX(XMP) 4GB ( 2x 2GB ) DS
-
-
-
1.65V
•
KINGSTON KHX2000C9AD3W1K2/4GX(XMP) 4GB ( 2x 2GB ) DS
-
-
-
1.65V
•
Kingston
KHX2000C9AD3T1K2/4GX(XMP) 4GB (2 x 2GB)
DS
-
-
9
1.65V
•
KINGSTON KHX2000C9AD3W1K3/6GX(XMP) 6GB ( 3x 2GB ) DS
-
-
-
1.65V
•
KINGSTON KHX2000C9AD3T1K3/6GX(XMP) 6GB (3x 2GB )
DS
-
-
-
1.65V
•
OCZ
OCZ3XTEP2000C9LV4GK
4GB (2 x 2GB)
DS
-
-
9-9-9-24 1.65V
•
PATRIOT
PVT36G2000LLK
6GB (3 x 2GB)
DS
-
-
8-8-8-24 1.65V
•
Chapter 1: Product introduction
1-12
Summary of Contents for M5A88-M EVO
Page 1: ...Motherboard M5A88 M EVO ...
Page 12: ...xii ...
