ASUS P3-P5G43
4-31
4.5.4
APM Configuration
APM Configuration
Restore on AC Power Loss
[Power Off]
Resume On By PS/2 KB/MOUSE
[Disabled]
Resume On Ring
[Disabled]
Resume On PCI Devices
[Disabled]
Resume On PCIE Devices
[Disabled]
Resume On RTC Alarm
[Disabled]
<Enter> to select
whether or not to
restart the system
after AC power
loss.
Restore on AC Power Loss [Power Off]
When set to
[Power Off]
, the system goes into off state after an AC power loss.
When set to
[Power On]
, the system goes on after an AC power loss. When set to
[Last State]
, the system goes into either off or on state, whatever the system state
was before the AC power loss. Configuration options: [Power Off] [Power On]
[Last State]
Power On By PS/2 KB/Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 KB/mouse to
turn on the system. This feature requires an ATX power supply that provides at
least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Resume On Ring [Disabled]
Allows you to enable or disable RI to generate a wake event.
Configuration options: [Disabled] [Enabled]
Resume On PCI Devices [Disabled]
When set to [Enabled], this parameter allows you to wake the system through a
PCI LAN or modem card. This feature requires an ATX power supply that provides
at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Resume On PCIE Devices [Disabled]
When set to [Enabled], this parameter allows you to wake the system through a
PCI Express card. This feature requires an ATX power supply that provides at least
1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Resume On RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is
set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute,
and RTC Alarm Second appear with set values. Configuration options: [Disabled]
[Enabled]
Summary of Contents for P3-P5G43
Page 10: ... ...