Asus P5W DH User Manual Download

Page: 210 / 212

A-2

Appendix: CPU features

A.2.2

Using the EIST

To use the EIST feature:
1. Turn on the computer, then enter the BIOS Setup.
2. Go to the Advanced Menu, highlight

CPU Configuration

then press <Enter>.

3. Set the

Intel(R) SpeedStep Technology

item to [Automatic],

then press <Enter>. See page 4-25 for details.

4. Press <F10> to save your changes and exit the BIOS setup.
5. After the computer restarts, right click on a blank space on the desktop, then

select

Properties

from the pop-up menu.

6. When the

Display Properties

window appears, click the

Screen

Saver

tab.

7. Click the

Power

button on the

Monitor power section to open the

Power Options Properties

window.

8. On the Power schemes section, click

, then select any option except

Home/Office Desktop or Always

On.

9. Click

Apply

, then click

10. Close the Display Properties window.

After you adjust the power scheme,

the CPU internal frequency slightly

decreases when the CPU loading is

low.

The screen displays and procedures may vary depending on the operating

system.

Summary of Contents for P5W DH





















































































































































































































Search results

Summary of Contents for P5W DH

Reviews:

Related manuals for P5W DH

Brands by name

Popular brands

Asus P5W DH, User Manual

Search results

Summary of Contents for P5W DH

Reviews:

Related manuals for P5W DH

Brands by name

Popular brands