Asus P5W DH User Manual Download

Page: 42 / 212

Chapter 2: Hardware information

2.4

System memory

2.4.1

Overview

The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory

Modules (DIMM) sockets.
A DDR2 module has the same physical dimensions as a DDR DIMM but has a

240-pin footprint compared to the 184-pin DDR DIMM. DDR2 DIMMs are notched

differently to prevent installation on a DDR DIMM socket.
The figure illustrates the location of the DDR2 DIMM sockets:

Channel

Sockets

Channel A

DIMM_A1 and DIMM_A2

Channel B

DIMM_B1 and DIMM_B2

2.4.2

Memory configurations

You may install 256 MB, 512 MB, 1 GB, and 2 GB unbuffered ECC/non-ECC

DDR2 DIMMs into the DIMM sockets.

• For dual-channel configuration, the total size of memory module(s) installed

per channel must be the same (D DIMM_A2 = D

DIMM_B2).

• Always install DIMMs with the same CAS latency. For optimum

compatibility, it is recommended that you obtain memory modules from

the same vendor. Visit the ASUS website (www.asus.com) for the latest

Qualified Vendors List.

• For dual-channel memory configuration, install the DIMMs in slots

DIMM_B1 and DIMM_A1 (orange slots); install another pair of DIMMs in

slots DIMM_B2 and DIMM_A2 (black slots).

P5W DH DELUXE

P5W DH DELUXE 240-pin DDR2 DIMM sockets

DIMM_A2

DIMM_A1

DIMM_B2

DIMM_B1

Summary of Contents for P5W DH





















































































































































































































Search results

Summary of Contents for P5W DH

Reviews:

Related manuals for P5W DH

Brands by name

Popular brands

Asus P5W DH, User Manual

Search results

Summary of Contents for P5W DH

Reviews:

Related manuals for P5W DH

Brands by name

Popular brands