ASUS P7H55-M PRO
3-29
Chapter 3
3.7.6
APM Configuration
APM Configuration
Restore on AC Power Loss
[Power Off]
Power On By RTC Alarm
[Disabled]
Power On By External Modems [Disabled]
Power On By PCI Devices
[Disabled]
Power On By PCIE Devices
[Disabled]
Power On By PS/2 Keyboard
[Disabled]
BIOS SETUP UTILITY
Power
<Enter> to select
whether or not to
restart the system
after AC power loss.
Restore On AC Power Loss [Power Off]
[Power Off]
The system goes into off state after an AC power loss.
[Power On]
The system goes into on state after an AC power loss.
[Last State]
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Power On By RTC Alarm [Disabled]
[Disabled]
Disables RTC to generate a wake event.
[Enabled]
When set to [Enabled], the items
RTC Alarm Date (Days) / System Time
will become user-configurable with set values.
Power On By External Modems [Disabled]
[Disabled]
Disables to power up the computer when the external modem receives a
call while the computer is in Soft-off mode.
[Enabled]
The computer could be powered up when the external modem receives a
call while the computer is in Soft-off mode.
The computer cannot receive or transmit data until the computer and applications are fully
running. Thus, connection cannot be made on the first try. Turning an external modem
off and then back on while the computer is off causes an initialization string that turns the
system power on.
Power On By PCI Devices [Disabled]
[Disabled]
Disables the PME to wake up from S5 by PCI devices.
[Enabled]
Allows you to turn on the system through a PCI LAN or modem card. This
feature requires an ATX power supply that provides at least 1A on the
+5VSB lead.
Power On By PCIE Devices [Disabled]
Allows you to enable or disable the PCIE devices to generate a wake event.
[Disabled]
Disables the PCIE devices to generate a wake event.
[Enabled]
Enables the PCIE devices to generate a wake event.
Power On By PS/2 Keyboard [Disabled]
[Disabled]
Disables the Power On by a PS/2 keyboard.
[Space Bar]
Allows you to turn on the system by pressing the Space Bar key on the
PS/2 keyboard. This feature requires an ATX power supply that provides at
least 1A on the +5VSB lead.
Summary of Contents for P7H55 DVI
