2-24
Chapter 2: BIOS information
After you have set a supervisor password, the other items appear to allow you to change
other security settings.
User Access Level [Full Access]
This item allows you to select the access restriction to the Setup items.
[No Access]
Prevents user access to the Setup utility.
[View Only]
Allows access but does not allow change to any field.
[Limited]
Allows changes only to selected fields, such as Date and Time.
[Full Access]
Allows viewing and changing all the fields in the Setup utility.
Change User Password
Select this item to set or change the user password. The
User Password
item on top of the
screen shows the default
Not Installed
. After you set a password, this item shows Installed.
To set a User Password:
1.
Select the
Change User Password
item and press <Enter>.
2.
On the password box that appears, type a password composed of at least six letters
and/or numbers, then press <Enter>.
3.
Confirm the password when prompted.
The message
Password Installed
appears after you set your password successfully.
To change the user password, follow the same steps as in setting a user password.
Clear User Password
Select this item to clear the user password.
Password Check [Setup]
[Setup]
BIOS checks for user password when accessing the Setup utility.
[Always]
BIOS checks for user password both when accessing Setup and booting
the system.
Summary of Contents for P7H55-M DVI
Page 1: ...Motherboard P7H55 USB3 ...
Page 12: ...xii ...
