ASUS PCI-SIU2 User’s Manual
59
Adding the ASUS driver to an existing IntraNetWare
1
To begin the installation you will need to change the directory to the
location of the server and initialize the network server, e.g.,
Type CD \ NWSERVER <ENTER> Type SERVER <ENTER>
2
At the NetWare prompt, Type LOAD INSTALL <ENTER>.
3
Select Driver Options from the window by highlighting it using the
UP or DOWN ARROW keys, press <ENTER>
•
Select Configure disk and storage device drivers from the win-
dow by highlighting it using the UP or DOWN ARROW keys,
press <ENTER>
4
Highlight Discover and load additional drivers and press <ENTER>
5
Press <Enter> to get list of available drivers
6
Press INS followed by F3
7
Insert PCI-SIU2 DRIVER DISK 1 into the A: drive and press <Enter>
Upgrading/Changing Driver on Existing IntraNetWare
1
To begin the you will need to change the directory to the location of the
server and initialize the network server, e.g.,
Type CD \ NWSERVER <ENTER> Type SERVER <ENTER>
2
At the NetWare prompt, Type LOAD INSTALL <ENTER>.
3
Select Driver Options from the window by highlighting it using the
UP or DOWN ARROW keys, press <ENTER>
•
Select Configure disk and storage device drivers from the win-
dow by highlighting it using the UP or DOWN ARROW keys,
press <ENTER>
4
Highlight Deselect a selected driver and press <ENTER>
5
Highlight the driver you wish to replace/upgrade and press <ENTER>
Repeat steps 4 and 5 for each instance of the driver
6
When all of the drivers you wish to upgrade/replace have been removed
highlight Select an additional driver and press <ENTER>
7
Press <INS> followed by <F3>
