ASUS PIKE II 3108 Series
2-5
2.2.2
MegaRAID Configuration Utility
The integrated RAID solution allows you to create the following RAID sets from
SAS hard disk drives supported by the LSI SAS 3108 12Gb/s SAS controller: RAID
0, 1, 10, 5, 50, 6, and 60.
• You may use disks of different sizes in one volume; however, the size of
the smallest disk determines the “logical” size of each member disk.
• DO NOT combine Serial ATA and SAS disk drives in one volume.
MPTFW and MPTBIOS version of the SAS RAID card
Take note of the BIOS and FW version of your SAS RAID card. You will need it if
you request support from the ASUS Technical Support team.
You can get the BIOS and FW version of your SAS RAID card, navigate to the
Properties
screen.
BIOS version
FW version
• The RAID setup screens shown in this section are for reference only and
may not exactly match the items on your screen due to the controller
version difference.
• The adapter name shown on the setup screens differs according to the
installed SAS RAID card.
Summary of Contents for PIKE II 3108 Series
Page 8: ...viii ...
