ASUS TUF Z270 MARK 1
4-9
Chapter 4
Deleting a RAID set
Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when
you delete a RAID set.
To delete a RAID set:
1.
From the utility main menu, select
2. Delete RAID Volume
and press <Enter>. The
following screen appears:
2.
Use the up/down arrow key to select the RAID set you want to delete, and then press
<Delete>. The following warning message appears:
3.
Press <Y> to delete the RAID set and return to the utility main menu, or press <N> to
return to the DELETE VOLUME menu.
Deleting a volume will reset the disks to non-RAID.
WARNING:
ALL DISK DATA WILL BE DELETED.
(This does not apply to Recovery volumes)
[HELP]
[DELETE VOLUME MENU]
Name Level
Drives Capacity Status Bootable
Volume0
RAID0 (Stripe) 2 298.0GB Normal Yes
[
↑↓
]-Select [ESC]-Previous Menu [DEL]-Delete Volume
ALL DATA IN THE VOLUME WILL BE LOST!
(This does not apply to Recovery volumes)
Are you sure you want to delete “Volume0”? (Y/N):
[DELETE VOLUME VERIFICATION]
Summary of Contents for PRIME Z270-A Series
Page 1: ...Motherboard TUF Z270 MARK 1 ...
Page 16: ...xvi ...
Page 46: ...2 8 Chapter 2 Basic Installation Chapter 2 To uninstall the CPU heatsink and fan assembly ...
Page 47: ...ASUS TUF Z270 MARK 1 2 9 Chapter 2 To remove a DIMM 2 1 5 DIMM installation ...
