background image

2-5

ASUS PG27U Series LCD Monitor 

2.5 

Connecting the cables

Connect the cables as the following instructions:

•. To.connect.the.power.cord:.

a.  Connect the power adapter securely to the monitor’s DC IN input.
b.  Connect one end of the power cord to the power adapter and the other 

end to a power outlet. 

•. To.connect.the.DisplayPort/HDMI.cable:.

a.  Plug one end of the DisplayPort/HDMI cable to the monitor’s DisplayPort/

HDMI port.

b.  Connect the other end of the DisplayPort/HDMI cable to your computer's 

DisplayPort/HDMI port.

•. To.use.the.earphone:.

connect  the  end  with  plug  type  to  the  monitor’s 

earphone jack when an HDMI or DisplayPort signal is fed.

•. To.use.the.USB.3.0.ports:

 Take the supplied USB 3.0 cable, and plug 

the smaller end (type B) of the USB upstream cable to the monitor’s USB 

upstream port, and the larger end (type A) to your computer’s USB 3.0 port. 

Make sure your computer is installed with the lastest Windows 7/Windows 8.1/

Windows 10 operating system. That will enable the USB ports on the monitor 

to work.

2.6 

Turning on the monitor

Press the power button. See page 1-3 for the location of the power button. The 

power indicator lights up in white to show that the monitor is ON.

Summary of Contents for ROG SWIFT PG27U


































Reviews: