-
Chapter 4: Motherboard Information
4.. CPU.fan.connector.(4-pin.CPU_FAN1)
The fan connector supports cooling fan of 350 mA ~ 740 mA (8.88 W max.)
at +12V. Connect the fan cables to the fan connectors on the motherboard,
making sure that the black wire of each cable matches the ground pin of the
connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! Do not place jumper caps on the fan connectors!
P5GC-MR
R
P5GC-MR.CPU.Fan.Connector
CPU_FAN
GND
+12V
CPU FAN IN
CPU FAN PWM
Summary of Contents for RS100-X5 - 0 MB RAM
