background image

2-5

RS720Q-E9-RS8 Series

2

4. 

Align the triangle mark on the CPU with 

the triangle mark on the CPU Carrier 

(A), install the CPU into the CPU Carrier 

until it clicks firmly into place (B), and 

then install the CPU Carrier into the 

heatsink until it clicks firmly in place (C).

 •  The CPU carrier varies between 

CPUs, ensure to use the 

correct CPU carrier for the 

corresponding CPU.

• 

Ensure that the triangle mark on 

the CPU matches the triangle 

mark on the CPU Carrier.

CPU Carrier

CPU

Triangle mark

5. 

Align the CPU and CPU Carrier in the correct orientation, and then place the heatsinks 

on top of the CPU sockets.

The CPU and CPU Carrier fits in only one correct orientation. DO NOT force the CPU and 

CPU Carrier into the socket to prevent damaging the CPU pins on the socket.

The heatsink for RS720Q-E9-RS8 Series differs between CPU1 and CPU2, please refer 

to the illustration below for more information on the heatsink and the corresponding CPU 

socket.

Summary of Contents for RS720Q-E9-RS8



























































































































































Reviews: