background image

5-17

RS720Q-E9-RS8 Series

5.4.8 

PCI Subsystem Settings

Allows you to configure PCI, PCI-X, and PCI Express Settings.

Load RT32 Image [Disabled]

Allows you to enable or disable RT32 Image Loading.
Configuration options: [Disabled] [Enabled]

Above 4G Decoding [Disabled]

Allows you to enable or disable 64-bit capable devices to be decoded in above 4G address 

space. It only works if the system supports 64-bit PCI decoding.
Configuration options: [Disabled] [Enabled]

The following item appears only when you set 

Above 4G Decoding

 to 

[Enabled]

.

First VGA 4G Decode [Auto]

This option enables or disables 64-bit capable devices to be decoded in above 4G 

address space (only if system supports 64-bit PCI decoding).

[Auto] 

Auto

[Above_4G] 

Force First VGA to above 4G

SR-IOV Support [Enabled]

This option enables or disables SIngle Root IO Virtualization Support if the system has 

SRIOV capable PCIe devices. 

Configuration options: [Disabled] [Enabled]

PCI Express Settings

PCI Express Device Register Settings

Relaxed Ordering [Enabled]

This option allows you to enable or disable PCI Express Device Relaxed Ordering.

Configuration options: [Disabled] [Enabled]

Extended Tag [Disabled]

This option allows Device to use an 8-bit Tag field as a requester when set to Enabled.
Configuration options: [Disabled] [Enabled]

Summary of Contents for RS720Q-E9-RS8



























































































































































Reviews: