17
RT-N10U
Chapter 3: Configuing the network clients
Accessing the wireless router
Setting an IP address for wired or wireless clients
To access the ASUS Wireless Router, you must have the correct TCP/IP settings
on your wired or wireless clients. Ensure that the clients’ IP addresses are within
the same subnet as the ASUS Wireless Router.
By default, the ASUS Wireless Router uses DHCP to automatically assign IP
addresses to the clients in your network.
You may, however, want to manually assign static IP addresses on some of the
clients or computers in your network rather than automatically getting IP addresses
from your wireless router.
Follow the instructions below that correspond to the operating system installed on
your client or computer.
3
Configuring the
network clients
In the Router mode, if you want to manually assign an IP address to your client, we
recommend that you use the following settings:
•
IP address
: 19.168.1.xxx (xxx can be any number between and 5. The IP
address should not used by another device)
•
Subnet Mask
: 55.55.55.0 (same as the ASUS Wireless Router)
•
Gateway
: 19.168.1.1 (IP address of the ASUS Wireless Router)
•
DNS
: 19.168.1.1 (ASUS Wireless Router) or assign a known DNS server in your
network
7656_rtn10u.indd 17
8//1 10:05:9 AM
Summary of Contents for RT-N10U
Page 1: ...User Manual RT N10U Wireless N150 Router 7656_rtn10u indd 1 8 1 10 05 9 AM ...
Page 22: ...22 RT N10U Chapter 4 Network configuration using the web GUI 7656_rtn10u indd 8 1 10 05 5 AM ...
Page 56: ...56 RT N10U Chapter 5 Using the Utilities 7656_rtn10u indd 56 8 1 10 06 05 AM ...
Page 62: ...62 RT N10U Chapter 6 Troubleshooting 7656_rtn10u indd 6 8 1 10 06 07 AM ...
