34
• Set AP Isolated
: Prevent wireless devices on your network
from communicating with each other. This feature is useful
if many guests frequently join or leave your network. Select
Yes
to enable this feature or select
No
to disable.
• Multicast Rate (Mbps)
: Select the multicast transmission
rate or click
Disable
to switch off simultaneous single
transmission.
• Preamble Type
: Define the length of time that the router
spent for CRC (Cyclic Redundancy Check). CRC is a method
of detecting errors during data transmission. Select
Long
if your wireless network is composed of older or legacy
wireless devices. Select
Short
for a busy wireless network
with high network traffic.
• RTS Threshold
: Select a lower value for RTS (Request to
Send) Threshold to improve wireless communication in a
busy or noisy wireless network with high network traffic and
numerous wireless devices.
• DTIM Interval
: DTIM (Delivery Traffic Indication Message)
Interval is the time interval before a signal is sent to a
wireless device in sleep mode indicating that a data packet is
awaiting delivery. The default value is three milliseconds.
• Beacon Interval
: The time between one DTIM and the next.
The default value is 100 milliseconds. Lower the Beacon
Interval value for an unstable wireless connection or for
roaming devices.
• Enable TX Bursting
: Improve transmission speed between
the wireless router and 802.11g devices.
• Enable WMM APSD
: Enable WMM APSD (Wi-Fi Multimedia
Automatic Power Save Delivery) to improve power
management between wireless devices. Select
Disable
to
switch off WMM APSD.
