60
To set up the operating mode:
1. From the navigation panel, go to
Advanced Settings
>
Administration
>
Operation Mode
tab.
2. Select any of these operation modes:
•
Wireless router mode (default)
: In wireless router mode,
the wireless router connects to the Internet and provides
Internet access to available devices on its own local network.
•
Access Point mode
: In this mode, the router creates a new
wireless network on an existing network.
3. Click
Apply
.
NOTE
: The router will reboot when you change the modes.
4.7.2 System
The
System
page allows you to configure your wireless router
settings.
To set up the System settings:
1. From the navigation panel, go to
Advanced Settings
>
Administration
>
System
tab.
2. You can configure the following settings:
•
Change router login password
: You can change the
password and login name for the wireless router by entering
a new name and password.
•
WPS button behavior
: The physical WPS button on the
wireless router can be used to activate WPS or switch off
wireless networking.
•
Time Zone
: Select the time zone for your network.
•
NTP Server
: The wireless router can access a NTP (Network
time Protocol) server in order to synchronize the time.
•
Enable Telnet
: Click
Yes
to enable Telnet services on the
network. Click
No
to disable Telnet.
