background image

LED projector E-Manual

7

Safety precautions

Using your LED projector

• 

Refer to the manual and take note of the safety instructions 

before operating your LED projector.

• 

Follow the notes and warnings stated in the user manual.

• 

Do not place your LED projector on uneven or unstable 

surfaces.

• 

Do not use your LED projector in smoky environments. Smoke 

residue may cause build-up on critical parts and damage the 

LED projector or decrease its performance.

• 

Keep the LED projector’s plastic packages out of the reach of 

children.

• 

Do not block or place anything near the LED projector’s 

ventilation holes. Doing so may cause internal heat build-up 

that can degrade picture quality and damage the projector.

• 

Ensure that the operating voltage of your LED projector 

matches the voltage of your power source.

Servicing and replacement of parts

• 

Do not disassemble or attempt to service this LED projector by 

yourself. Contact your local ASUS service center for assistance.

• 

When replacing parts of your LED projector, purchase items 

as specified by ASUS and contact your local service center for 

assistance.

Summary of Contents for S2 Series

























































Reviews: