background image

5-19

ASUS T3-P5G965

5.4.2  CPU Configuration

The items in this menu show the CPU-related information that the BIOS 

automatically detects.

CPU ratio adjustment [Auto]

Sets the ratio between the CPU Core Clock and the Front Side Bus 

frequency. The default value of this item is auto-detected by BIOS. Use the 

<+> or <-> keys to adjust the values.

C1E Support [Enabled]

Allows you to enable or disable the C1E support. In C1E mode, the CPU 

power consumption is lower than idle. Configuration options: [Disabled] 

[Enabled]

Max CPUID Value Limit [Disabled]

Enable this item to boot legacy operating systems that cannot support 

CPUs with extended CPUID functions. Configuration options: [Disabled] 

[Enabled]

CPU TM function [Enabled]

Allows you to enable or disable the CPU internal thermal control function. 

In TM mode, the CPU power consumption is reduced. Configuration options: 

[Disabled] [Enabled]

Execute Disable Function [Enabled]

Allows you to enable or disable Execute Disable Function. 

Configuration options: [Disabled] [Enabled]

Configure advanced CPU settings

Module Version: 3C.0E
Manufacturer: Intel

Brand String: Genuine Intel(R) CPU 3.80GHz

Frequency   : 3.80GHz

FSB Speed   : 800MHz 

  

Cache L1    : 16 KB 

  

Cache L2    : 2048 KB 

  

Ratio Status: Unlocked (Max:19, Min:14)

Ratio Actual Value: 14

CPUID       : F43

CPU ratio adjustment 

 [Auto]

C1E Support 

 [Enabled]

Max CPUID Value Limit: 

 [Disabled]

CPU TM function 

 [Enabled] 

Execute Disable Bit 

 [Enabled] 

Hyper Threading Technology 

 [Enabled]

Intel(R) SpeedStep(tm) tech. 

 [Automatic]

Summary of Contents for T3-P5G965 - T Series - 0 MB RAM



















































































Reviews: