background image

6-4

Chapter 6: Driver installation

5.  Select the RAID controller driver from the list, then press <Enter>.

 ENTER=Continue    F3=Exit

Windows Setup

You have chosen to configure a SCSI Adapter for use with Windows, 

 

using a device support disk provided by an adapter manufacturer. 

 

Select the SCSI Adapter you want from the following list, or press ESC 

to return to the previous screen.

NVIDIA RAID Driver (required) 

NVIDIA nForce Storage Controller (required)

6.  The Windows

®

 Setup loads the RAID controller drivers from the RAID driver 

disk. When prompted, press <Enter> to continue installation.

7.  Setup then proceeds with the OS installation. Follow screen instructions to 

continue.

6.1.4 

Installing an operating system

This motherboard supports Windows

®

 XP/64-bit XP/Vista/64-bit Vista operating 

systems (OS). Always install the latest OS version and corresponding updates to 

maximize the features of your hardware.

•  Motherboard settings and hardware options vary. Use the setup 

procedures presented in this chapter for reference only. Refer to your OS 

documentation for detailed information.

•  Make sure that you install Windows

®

 XP Service Pack 2 or later versions 

before installing the drivers for better compatibility and system stability.

Windows

®

 Vista OS

To install the RAID controller driver when installing Windows

®

 Vista OS

1.   Insert the floppy disk with RAID driver into the floppy disk drive.
2.   During the OS installation, select 

Load Driver

, click 

Browse

, then select 

Floppy Disk Drive (A:)

. Click 

OK

.

3.  Select 

NVIDIA nForce RAID controller (A:\nvrd32.inf)

 and click 

Next

.

4.   Follow the succeeding screen instructions to complete the installation.

Summary of Contents for TW100-E5 - iQuadro - 0 MB RAM









































































































































Reviews: