20
ASUS TXP4 User’s Manual
III. INSTALLATION
SIMM Memory Installation
1. The SIMM memory modules will fit in only one orientation as shown because
the plastic safety tab on one end of the SIMM sockets requires the notched end
of the SIMM memory modules.
TXP4 72 Pin SIMM Sockets
Notched End
1 2 3 4
R
2. Press the memory module firmly into place starting from a 45-degree angle,
making sure that all the contacts are aligned with the socket.
3. With your fingertips, rock the memory module into a vertical position so that it
clicks into place. The plastic guides should go through the two mounting holes
and the support clips should snap.
Clip
Plastic Safety Tab (This Side Only)
Mounting Hole
72 Pin DRAM in SIMM Socket
To release the memory module, push both support clips outward and rock the
module out of the support clips.
(System Memory)
III. INST
ALLA
TION
