ASUS V-Series P5P43
5-19
Selecting a very high DRAM frequency may cause the system to become
unstable! If this happens, revert to the default setting.
FSB
DRAM.Frequency
Auto 667MHz 800MHz 1066MHz
1333
v
v
v
v
1066
v
v
v
v
800
v
v
v
The following table shows the DRAM Frequency options that appear when the
FSB value is 1333, 1066, and 800.
DRAM.Frequency.[Auto]
Allows you to set the DDR2 operating frequency. Configuration options: [Auto]
[667 MHz] [800 MHz] [1066MHz]
Memory.Over.Voltage.[Auto]
Allows you to adjust Memory Over voltage and each step is 6.25mV
SB1.5V.Voltage.[Auto]
Allows you to set the SB voltage. Configuration options: [Auto] [1.5V] [1.57V]
[1.64V] [1.71V]
SB1.1V.Voltage.[Auto]
Allows you to set the SB voltage. Configuration options: [Auto] [1.126V] [1.196V]
[1.266V] [1.336V]
CPU.Voltage.[Auto]
Allows you to set the CPU VCore voltage. The values range from 0.8500V to 1.55V
with a 0.00625V interval. Configuration options: [Auto]
Setting a very high voltage may damage the component permanently, and
setting a very low voltage may cause the system to become unstable.
Setting a very high voltage may damage the component permanently, and
setting a very low voltage may cause the system to become unstable.
