4-24
Chapter 4: BIOS setup
4.5.4
APM Configuration
APM Configuration
Restore on AC Power Loss
[Power Off]
Resume On By RTC Alarm
[Disabled]
Resume On By External Modems
[Disabled]
Resume On By PCI Device
[Disabled]
Resume On By PCIE Device
[Disabled]
Resyne On By PS/2 Keyboard
[Disabled]
Resume On By PS/2 KB/MS
[Disabled]
Restore on AC Power Loss [Power Off]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system goes on after an AC power loss. When set to
[Last State], the system goes into either off or on state, whatever the system state
was before the AC power loss. Configuration options: [Power Off] [Power On]
[Last State]
Resume.On.By.RTC.Alarm.[Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is
set to [Enabled], the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute,
and RTC Alarm Second appear with set values. Configuration options: [Disabled]
[Enabled]
Resume.On.By.External.Modem.[Disabled]
Allows you to enable or disable external modem to generate a wake event.
Configuration options: [Disabled] [Enabled]
Power.On.By.PCI.Devices.[Disabled]
When set to [Enabled], this parameter allows you to wake the system through a
PCI LAN or modem card. This feature requires an ATX power supply that provides
at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Resume.On.By.PCIE.Devices.[Disabled]
When set to [Enabled], this parameter allows you to wake the system through a
PCI Express card. This feature requires an ATX power supply that provides at least
1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Power On By PS/2 Keyboard [Disabled]
Allows you to enable or disable the PS/2 keyboard to generate a wake event. This
feature requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Space Bar] [Ctrl-Esc] [Power Key]
<Enter> to select
whether or not to
restart the system
after AC power loss.
