C h a p t e r 2 : B a s i c i n s t a l l a t i o n
C h a p t e r 2 : B a s i c i n s t a l l a t i o n
C h a p t e r 2 : B a s i c i n s t a l l a t i o n
C h a p t e r 2 : B a s i c i n s t a l l a t i o n
C h a p t e r 2 : B a s i c i n s t a l l a t i o n
2 - 4
2 - 4
2 - 4
2 - 4
2 - 4
2.3
Installing the power supply unit (PSU)
To install a PSU:
1.
Orient the PSU to the PSU
slot.
2.
Slide the PSU into the slot
until it snugly fits the metal
rail.
3.
Secure the PSU with screws.
We recommend that you install a standard ATX PSU with at least 350 W
power output.
Voltage selector
Voltage selector
Voltage selector
Voltage selector
Voltage selector
If your PSU has a 115 V/230 V
voltage selector switch located
beside the power connector: Use
this switch to select the
appropriate voltage according to
the voltage supply in your area.
If the voltage supply in your area is
100-127 V, set the switch to 115 V.
If the voltage supply in your area is
200-240 V, set the swtich to 230 V.
Setting the switch to 115 V in a 230 V environment will seriously
damage the system!
