8
ASUS USB Wireless LAN Adapter
English
Connecting the ASUS USB Wireless LAN Adapter
To an access point (Infrastructure network)
The ASUS USB Wireless LAN Adapter is set to Infrastructure mode by
default. In an Infrastructure network, the device connects to an access point
(AP) that serves as the link to other wireless device(s) or to a wired network.
To connect the ASUS USB Wireless LAN Adapter to an access point.
1. Launch the Wireless Settings utility by double-clicking the Control Center
icon in the Windows
®
taskbar.
2. Click The
Survey
button to scan
available APs within the ASUS
USB Wireless LAN Adapter
range. Select the AP you wish to
connect.
3. Click the
Config
button to
configure the device settings. Set
the Network type to
Infrastructure
, then
enter the
Network Name (SSID)
and
Channel
of the AP you wish to
connect. Click
Apply
when done.
4. Click the
Encryption
tab if your
selected AP has an enabled WEP
encryption ( ).
Obtain the WEP encryption keys
from the network administrator,
then enter them in the
Key 1 ~ 4
fields. Click
Apply
when finish.
IMPORTANT!
The encryption
settings of the device and the
AP must be identical to
establish connection.
