41
Optical Drive
Inserting an optical disc
1. While the Notebook PC’s power is ON,
press the drive’s eject button and the tray
will eject out partially.
2. Gently pull on the drive’s front panel and
slide the tray completely out. Be careful not
to touch the CD drive lens and other mecha-
nisms. Make sure there are no obstructions
that may get jammed under the drive’s tray.
3. Hold the disc by the edge and face the
disc’s printed side up. Push down on both
sides of the disc’s center until the disc
snaps onto the hub.
The hub should be
higher than the disc when correctly
mounted.
4. Slowly push the drive’s tray back in. The
drive will begin reading the table of contents
(TOC) on the disc. When the drive stops, the
disc is ready to be used.
It is normal to hear as well as feel the CD spinning with great intensity in the CD
drive while data is read.
1
2
Using the Notebook PC
4
Summary of Contents for X5DAB
