39
ASUS Xonar DX
5. Put your microphone 20~30cm away from you (fix the distance) and do NOT
speak too close or too loud into the microphone to avoid signal clipping and
distortion. Enable “microphone boost” on Xonar DX audio center mixer to get
proper input signal level.
6. It’s suggested to disable original AEC function residing in some of the soft-
phones or voice communication programs to get best performance from
Xonar DX audio card.
AEC function will be only suitable for bi-direction voice communication
applications. The speaker type will be set as 2 speakers and special voice
processing mode while AEC is applied (all audio effects will be suspended and
those controls on audio center will be frozen.). After you finish the voice-over-
IP applications, please remember to turn it off for normal high-fidelity audio
playback mode.
No
Item
Description
1
AEC
Click AEC function page
2
Enable AEC
Click the checkbox to enable AEC function. A alert message
will pop up:
This message implies the speaker configuration will be set to
2 speakers and all sound effect processors will suspended
except AEC function. Click “OK” to accept it; Click “Cancel”
if you want to enable it later. Check “Don’t remind me again”
will not show this message again.