10
AS4002T AS4004T
Securing the Power Cord
Note: You can use the provided cord bracket to secure the power cord in place, if you are concerned
about the NAS power cord becoming detached when the NAS is moved.
Attach the bracket to the power cord as shown in the graphic below.
AS4002T AS4004T
Connecting and Powering on the NAS
1.
Connect the NAS to its power supply.
AS4002T AS4004T
2.
Connect the NAS to your router, switch or hub using an Ethernet cable.
3.
Press and hold down the power button for 1
– 2 seconds until the blue power LED indicator is lit. This
indicates that the NAS is now powered on. While the NAS is being powered on, the green system status
LED indicator will flash and the blue network LED indicator will be lit as well.