15
Lift Arm Brace
When the lift arms must be left in the
raised position, the lift arm brace must
be engaged.
To engage:
1. Lower the lift arms. Remove any
attachments and park the machine on
level ground.
2. Remove the pin that secures the
brace to the fender.
3. Wrap the spring around the cylinder
and attach it to the other side of the
brace (photo D).
4. Raise the lift arms until the brace con-
tacts the cylinder rod (photo E).
5. Slowly lower lift arms until the lift arms
come to rest (stop) on the brace.
6. Shut the engine off and exit the
machine.
To disengage:
1. Remove the spring from the cylinder.
2. Raise the lift arms until the brace falls
away from the cylinder rod.
3. Lower lift arms.
4. Turn the engine off.
5. It is now safe to exit the machine and
re-attach the brace to fender.
M
MA
AC
CH
HIIN
NE
E O
OP
PE
ER
RA
AT
TIIO
ON
N
D
E
