Rubber Track Loader
13. Maintenance
13-5
Figure 16-11
16-009
4.
Using a ruler, measure the distance between the
straightedge and track. The track should not de-
flect more than 0.75” between the top of the
track and the straightedge.
5.
If the track deflects more than 0.75”, tighten the
track between 0.50” and 0.75”.
Fuse Box
Figure 16-12
16-012
The fuse box is located on the left side of the engine
compartment. The machine should never be oper-
ated with the fuse box cover removed.
Grease Fittings
Figure 16-13
16-013
The locations of the grease fittings for the left side of
the machine are shown above. An identical set of
fittings is located on the right side of the machine.
These fitting should be lubricated at least after every
10 hours of operation using
ASV Multi Purpose EP
Lithium Grease
.
