67
DESCRIPTION OF ERROR CODE
Error code Possible causes
Check
Solution
E1
The motor is not working
properly
The motor wiring plug
is correctly inserted into
the terminal or not
Connect the plug or replace the
motor
Cable failure inside the
machine
Examine the cable for
defects
Replace the cable
The display has no cor-
responding control signal
output to the motor
Change the electronic display
E2
After starting the test in
the mode of body fat test,
the heart rate detector is
not held by hand as soon
as possible
Please hold the heart rate de-
tector by hand within 3 seconds
after the test is started
The display cannot display
the heart rate value
Whether there is a heart
rate value display in
other modes
If there is still no heart rate
value display in other modes,
replace the display; if there is
still no value displayed, replace
the heart rate connecting cable
NOTE
:
1.
This display needs to be equipped with a 9V/1A power adapter. When the display displays
abnormally, please pull out the power plug and plug it again.
2.
Without any operation, the product will enter standby mode after five minutes.
In case of malfunction, please remove the batteries and the power supply for a few seconds.
If the error still occurs, please contact our service department.
If you have any questions about your fitness equipment, our employees in the
service department will be happy to help you.
Summary of Contents for S18
Page 1: ...BENUTZERHANDBUCH MANUAL S18 VERSION A BU www AsVIVA de ...
Page 37: ...37 ...