2. Installation Procedure:
1) 1
st
Step:
Pull the rubber plug out of the bottom tray (Picture 9). Keep the Ink Filling Hole of the ink tank opened (Picture
10). Insert it into the bottom tray as following:
1) let Point 2 slide into the tray (Picture 11).
2) Tear the other side of the tray to let the Point 1 clip into the tray (Picture 12).
Make sure that the ink tank fit into the tray well (Picture 13/14).
(9)
(10)
(11)
(12)
(13)
(14)
