Switching extraction on and off
1. Press the + (plus) button.
The cooker hood will switch on at the lowest setting.
2. Press the + (plus) button again for a higher fan setting. Press and hold the + (plus) button for 1
second to select the highest setting (boost).
3. Press the – (minus) button to select a lower setting.
The extraction setting is indicated in the speed level indicators.
Each light area represents a speed level. Speed level indicator 4 also serves as a boost indicator
when it blinks.
4. If the extraction setting is set at 1, you can switch off the cooker hood by quickly pressing and
releasing the – (minus) button.
5. To switch off the cooker hood from, press and hold the – (minus) button for at least 1 second.
Switch on the boost setting
1. Press and hold the + (plus) button for at least 1 second.
The boost setting is switched on for 10 minutes. The speed level 4 indicator will flash during this
period. The original extraction setting will be reactivated after this period.
2. Press and release the – (minus) button to switch off the boost setting.
NOTE!
If the boost setting has been selected, the timer function cannot be activated.
Switching on the timer
1. Press the timer button.
The timer indicator will start to blink.
The cooker hood will switch off automatically after 10 minutes.
2. Switch off the timer function by pressing a random button (except the one for lighting).
9
Operation
Summary of Contents for BU90AA-ABB01
