EN 13
INSTALLATION
Connection
Electrical connection
This is an insulation class II (double insulated) appliance. The cable
does not need to be connected to an earthed socket.
Check whether the voltage mentioned on the type plate corresponds
with the voltage of the domestic electric installation.
Connection to the mains power should be carried out as follows:
BROWN=
L
phase
BLUE =
N
zero.
Each cooker hood is equipped with a connection plug. Install the
cooker hood in such a way that the plug is accessible.
Please note!
If you want to make a fixed connection, make sure that an omnipolar
switch with a contact separation of at least 3 mm is fitted in the
supply line.