Appliance on/off, temperature settings, and extra function key
A
Refrigerator compartment temperature display
B
The indicator for the selected temperature will be lit.
Intensive cooling function indicator
C
Symbol
C
will be lit when the intensive cooling function is activated.
High temperature indicator
D
To set the appliance temperature or activate extra functions, press the A key successively. When
the key is first pressed, the currently set value or function will start to flash. With each successive
press of the key, the indicator moves to the next setting. The indicator cycles through the settings
in a circular manner, from right to left. While the settings are being adjusted, the display will flash.
Three seconds after the key is released, the setting will be stored automatically and the relevant
symbol will be lit.
Switching the appliance on/off
Switching the appliance on:
Press the
A
key and hold it for 3 seconds.
Switching off the appliance:
Again press the
A
key and hold it for 3
seconds. The appliance will be off, but there is still voltage in it as it is
still connected to the power mains.
Adjusting the temperature in the appliance
INFORMATION!
•
The factory default setting is the recommended temperature of 4 °C.
WARNING!
After you have switched on the appliance it will take several hours for the temperature to decrease
to the set temperature. Do not put food into the appliance until the temperature has decreased
to the set temperature.
17
Operating the appliance
