Atag KD5188C, Instructions For Use Manual

 456618

•   Place the appliance in dry and well aired room. The appliance 

operates best at temperature ranges indicated in the chart 
below. Relevant class of the appliance is indicated on the 
rating plate.

Class

Ambient temperature

SN (subnormal)

from + 10°C to + 32°C

N (normal)

from + 16°C to + 32°C

ST (subtropical)

from + 16°C to + 38°C

T (tropical)

from + 16°C to + 43°C

Positioning the appliance requires two persons in order to avoid 
injuries or damage to the appliance.

•   Place the appliance 

fl

 atly and 

fi

 rmly on a solid base. 

•   Avoid exposing the appliance to direct sunlight or heat 

sources. If this is not feasible, install insulation plate between 
the appliance and adjacent heat source.

•   Be sure to leave enough space for cooling of condenser 

(distance from the wall or the opening should be 200 cm

2

). 

Distance to the cabinet above the appliance should be at least 
5 cm.

  After the installation, the appliance mains plug should be 

accessible!  

•   Use the power cord to connect the appliance to the mains 

power. Wall outlet must be 

fi

 tted with ground terminal (safety 

socket). Required nominal voltage and frequency are indicated 
on the relevant label or rating plate of the appliance.

•  Mains power connection and grounding must be made in line 

with standing regulations and local requirements. 

The appliance is able to accommodate minor temporary voltage
tolerances, but they may not exceed -6% to +6%.

Selecting the location

Positioning the 
appliance

Connecting to power 
supply

6

Installation and connection