www.AtairCanopies.com
Dragon User Manual
Page 27 Atair Canopies
Step 4
Crouch next to the risers and face your
canopy. Slip the fingers of your left hand
between each left-hand riser and
between the left-hand steering line and
the risers. Do the same with your right
hand. The idea is to have each line
group and each steering line occupying
a slot between two fingers. Stand
between the right and left-hand riser
groups and grasp the lines as shown. Be
sure there are no twists in the risers. Start
moving up the lines, allowing them to
slide between your fingers. Push the
slider ahead until you reach the bottom
of the canopy.
Step 5
At this point, it’s possible to determine if
your canopy and lines aren’t straight. If
there are twists in the lines as shown, this
means your rig did a loop through your
risers at some point. To fix this, drop the
lines, stretch the canopy and lines out
again, and straighten the entanglement
out. Get help from a rigger if you have
any questions. Do a line check again to
make sure you have done it correctly.