4. Using the table below, locate the
second digit of the percentage
you want to set.
Second Digit of
the Percentage
Switch
Number
1
2
3
4
5
6
7
8
9
5
6
5 + 6
7
5 + 7
6+7
5+6+7
8
5 + 8
5.
6.
7.
Write the switch numbers that are
next to the second digit of the
percentage that you selected
from the table.
Repeat your answers from ques-
tions 3 and 5 here.
Slide the numbered switches that
you marked in Step 6 down on
Switch Box 1. All other switches
should be in the up position.
5+7
2
5 + 7
Side A Side B
Side A Side B
▼
▼
▼
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
If you want to set other system options, continue following the instructions
below. Otherwise, skip to the section titled "Replacing the CAS’s Cover."
LINE SPACING
Switch Box 2 (Figure 10) is used to set line spacing, suppress records for
incoming calls, local calls, and calls without account numbers. The switch
box is divided into two sides. Side A is used to adjust the number of blank
Iines between call records. Side B is used to set the remaining system
options. Follow the instructions below to set the number of blank lines
between call records.
Side A Side B
Switch box 2
1 2 3 4 5 6 7 8
Figure 10
Setting the Line Spacing Option Switches
11
